While it’s easy to maintain laminate flooring (as they are resistant to several problems), laminate flooring water damage is still a serious problem typically caused by excessive moisture underneath the planks.
If the damage is widespread and the original laminate is of poor quality, the best thing would be to replace the entire floor altogether.
Symptoms of Laminate Flooring Water Damage
As planks edges become clearly swollen, puffy, and raised that usually indicates laminate flooring water damage. Generally, the uneven moisture distribution around the plank causes the laminate to bulge out.
However, the moisture underside the damaged plank is impossible to view. As a result after a long time, planks slowly start to compress and swell underneath and its edges starts to bulge upwards. This breaks the locks between the planks holding the floor in place and thereby forcing it to collapse.
Causes of laminate flooring water damage
Finding out the actual source of moisture could be tricky, though. If the laminate flooring water damage is confined in small space, it could be the result of a spill or pet urine left unchecked for too long. Or it could be because of the improperly adjusted planks.
Anyways, if you notice the floor cupping, that may be from a water pipe leak or appliance of some other kind. Likewise, poor maintenance could be another reason, too. Or, sometimes the planks could have been installed over uncured concrete subfloor.
No matter the reason, simply follow these simple steps to repair as well as prevent the damage to your floor.
1. Examine the Damage – Figure out the damaged planks and slowly start the process of lifting them off the floor. Also, try to examine the source of water that caused the flooring to damage.
If you notice that a leak in the kitchen appliance like the water sink is the main reason, you MUST repair the leak first to prevent damage in the future after you’ve repaired the planks.
2. Remove the damaged planks – As planks are joined, and hence, you need to replace everything – from the baseboards (along the wall) to the damaged planks. When you’re removing the planks, however, make sure to check for moisture or water underneath it.
Before removing the damaged planks, ensure you have the exact matching spare planks for replacements – the size and color must match … exactly.
However, if you don’t have the exact match to replace the damaged planks, you may need to remove the entire floor. 4. Replace the Damaged Flooring – Once you are face to face with the damaged planks, simply remove them and replace it with a new one. Now, slowly replace all the planks back to their place and work your way all the way up to the walls, replacing the baseboards at the end.
It is very easy to maintain laminate floors. Prevent spills, pet urine, and other damage to your flooring by following these easy-to-follow steps.
Keep dirt and water out of the room by placing mats on both sides of the entrance
Place protectors at the bottom of heavy furniture to prevent scuff marks on the planks
Let flooring to expand to keep planks from peaking and buckling
It’s very easy to prevent laminate flooring water damage. Simply follow the above preventive steps to prevent laminate from water, dirt, and other damaging stuffs.